Milk cooking tanks 500 Ltr, are one of the most widely used types of the nine milk cooling and storage options. The vertical cylindrical model is a type of has one piece and a fully openable top. This type may not require a pump to pour milk and can be cleaned manually, so that suitable for use in rural areas and the dairies making milk production developing countriesThe rate of oil-free dry matter to be put into the milk cooling tank is 9.5%, the rate of fatness is 3.5%, the pH value is between 6.3 and 6.6. pH value = 4.9 is the point of cessation and curdling. There is no risk factor when the milk is kept below + 10 ° C. (Even if the milk, whose pH is dropped below 6.3, is cooled, the risk of curdling cannot be eliminated.) Ideal storage temperature for raw milk is +4 ° C. At this temperature, harmful microorganisms’ yeasts and molds show an insignificant reproduction within 19 hours. Reproduction accelerates between +20 and +25 ° C. The durability of milk at +4 ° C is around 36 hours. Ph comes to a critical point after 36 hours. To ensure that the cooling in the tank is healthy and does not risk the system, pay attention to the minimum amount of milk required in the tank.
Features of Cooking Tanks
In a milk cooking tank, 500 Ltr Ep type of robot heat exchanger plate provides cooling. The body is 2.5 mm and the isolated body is 1.5 mm AISI 304 stainless steel. Insulation range is insulated with 60 mm thick CFC free high-density polyurethane foam material. The tank body is coupled on the solid chassis made of AISI 304 stainless steel and adjustable feet. Welded areas are 1st class ARGON TIG welding and 1st class smooth polishing. Product outlet DN male butterfly valve. 0,37 KW 33 d / d reducer and associated stainless steel mixer blades. After the milk reaches the desired set value an automatic mixing program that has special software makes the mixer operate for 3 minutes and stop for 10 minutes. Cooling compressors are attached to the solid chassis on the tank. Besides, in a milk cooking tank 500 Ltr. there are 1 piece 2 HP Eco watt, 1 condenser, and 1 fan motor. A 404 gas is used in the cooling process. It has the possibility of cooling without icing even in low milk quantities. The electronic control system is coupled to the panel and all transactions are made through the electronic control system.